 |
CNMSX-AV
is the cost-competitive option in Crestron's new generation of control
systems. The CNMSX-AV is fully expandable, a perfect choice for
many small to mid-sized control applications.
Ideal
for: boardrooms, training centers, conference centers, videoconferencing,
lighting control, environmental control, command and control centers,
high tech homes
|
|
Detail
| Key Features | Tecnical
Specification
Crestron's
CNMSX-AV is a high performance, integrated control system with dynamic
expansion capabilities. Performance, value, reliability and a link
to future technology are what set MSX apart from other control systems.
The
CNMSX-AV offers communication never before available in a control
system. Crestron's exclusive DPA (Direct Processor Access) provides
a direct link to any LAN or Internet connection via Ethernet. The
MSX system's DPA card slot accommodates 10BaseT, 100BaseT and future
communication protocols like ATM and Firewire. Each MSX control
system has its own user-assigned IP address, seamlessly integrating
with your computer network.
MSX
control systems provide the link to all the technology you want
to control. Compatible with every Crestron control panel, touchpanel,
wireless transmitter, interface and network device, Crestron's MSX
systems put you in control - the Crestron way.
top
Key
Features:
- (8)
IR/serial / one-way RS-232 ports
- (6)
bidirectional RS-232/422/485 ports
- (8)
digital/analog input, digital output ports
- (8)
low voltage, isolated relays
- DPA
slot Ethernet-based communication
- Optional
3-slot card cage for expansion
- Integrated
110/220-volt power supply
- Programming
ports on both front and rear panels
- Powerful
programming with drag-n-drop software. Program in Crestrons graphical
SIMPL™ language or in "C-like" SIMPL+™ procedural
programming language, or BOTH. Only Crestron provides the best
of both worlds so that any control system programmer is a Crestron
pro.
top
|
Crestron
CNMSX-AV
Technical Specifications
|
| |
| Connectors |
| |
NET: |
(1)
6-wire RJ-type connector and (1) 4-pin male connector; for expansion
to Cresnet or SmarTouch peripherals; 50W maximum load depending
on expansion slot load |
| |
RELAYS: |
Furnishes
(8) normally open, isolated relays; each relay is rated 1A,
30VAC/DC; MOV arc suppression across contacts for use with "real
world" loads |
| |
INPUT/OUPUT: |
Furnishes
(8) programmable analog inputs and digital inputs/outputs; digital
outputs offer 250mA sync from maximum 24VDC; catch diodes for
use with "real world" loads; digital inputs rated
for 0-24 VDC, 20K ohms input impedance, logic threshold 1.25VDC;
analog inputs rated 0-10VDC, protected to 24VDC maximum, 20K
ohms input impedance; programmable 2K ohms pullup resistor (per
pin, software reference to GND or closure to GND) |
| |
IR/SERIAL: |
Furnishes
(8) serial outputs for (IR), RS-232 or serial interface; signal
(S) and ground (G) pins; infrared output up to 1.2MHz |
| |
COM: |
Furnishes
(6) bidirectional serial ports for RS-232, RS-422 or RS-485
communication with hardware and software handshaking; speeds
up to 230,400 bps |
| |
COMPUTER: |
(2)
one per front and rear panel, 9-pin DB9 female connector for
programming with a PC; modem compatible; not included |
| |
| Expansion
Slots |
| |
DPA: |
Direct
Processor Access expansion slot for optional local area network
(LAN) interface card; supports CNXENET 10BaseT Ethernet card;
requires field installation and has (1) 8-wire RJ45 connector
for communication access |
| |
CNXCAGE: |
Optional
(3) open "card cage" slots accept any "X"
Cresnet control card |
| |
| LED
Indicators
|
| |
PWR: |
Indicates
power supplied to the unit |
| |
NET: |
Indicates
activity within the system |
| |
ERR: |
Indicates
an error message is available from the software feature buttons |
| |
TXD
(Ethernet): |
Indicates
transmission of ethernet data |
| |
RXD
(Ethernet): |
Indicates
reception of ethernet data |
| |
LNK
(Ethernet): |
Indicates
attachment to ethernet network |
| |
ERR
(Ethernet): |
Indicates
ethernet protocol error |
| |
| Reset
Buttons |
| |
HW-R: |
Permits
physical reset of system |
| |
SW-R: |
Restarts
SIMPL program |
| |
| Power
Requirements |
| |
100-250VAC,
2.3A, 50/60Hz, internal universal power supply |
| |
| Dimensions |
| |
3.47"
/ 8.81cm (H) x
19.00" / 48.26cm (W) x
8.43" / 21.41cm (D) |
| |
| Weight |
| |
7.01lbs
/ 3.18kg |
| |
| CNX
Expansion Cards |
| |
CNXENET: |
10BaseT
Ethernet Expansion Card |
| |
CNXTA: |
Telephone
Interface Card |
| |
CNXIO-16: |
Analog
Input - Digital Input/Output Card |
| |
CNXAO-8: |
Analog
Output Card |
| |
CNXCOM-2: |
RS-232/422/485
Expansion Card |
| |
CNXMIDI: |
MIDI
Interface Expansion Card |
| |
CNXRY-8: |
Output
Expansion Card |
| |
CNXRY-16: |
Output
Expansion Card |
| |
CNXVTC-3: |
Volume
Control Expansion Card |
| |
CNXIR-8: |
Infrared
and Serial Expansion Card |
top
|
